Leading precision ceramics & power semiconductor companies across the full industry chain
218 exhibitors
Established in 2013, Shenzhen Xianhua Technology Co., Ltd. is a national high-tech enterprise integrating R&D, production, and sales. The company primarily supplies intelligent fluid-mixing equipment to sectors such as semiconductors, LEDs, capacitors, batteries, cosmetics, and healthcare, offering customized equipment and solutions to enable smart manufacturing for its clients. Leveraging regional supply chain advantages, years of industry experience, and the robust R&D capabilities and continuous innovation of its technical team, the company has emerged as a domestic leader in intelligent fluid-mixing manufacturing equipment—specifically for semiconductor, LED packaging, and battery applications. It is one of the few smart manufacturing enterprises in China possessing the capability to independently develop and produce core components.
Yixing Fengyujie Ceramic Technology Co., Ltd. specializes in the production of alumina ceramic plates, utilizing manufacturing processes such as tape casting, dry pressing, and hot injection molding. The company offers products with purity levels ranging from 95% to 99.7%. Its facilities are equipped with a variety of machinery, including high-temperature tunnel kilns, high-temperature bell-type kilns, hydraulic presses, and imported laser equipment. The company is capable of producing ceramic plates in thicknesses ranging from 0.25 mm to 50 mm, with products widely used across industries such as electrical appliances, machinery, chemicals, and electronics.
AOI Inspection Systems
Release film
Carbon felt, graphite felt, soft graphite felt, carbon rope, high-purity carbon fiber powder, carbon fiber composite hard felt, custom-shaped carbon fiber insulation components for thermal zones, etc.
Ceramic sintering furnaces, vertical curing furnaces, vacuum soldering furnaces, etc.
BEST's main products include thick-film ceramic boards, high-frequency attenuators, high-frequency loads, high-voltage resistors, high-resistance resistors, high-power resistors, thick-film hybrid circuits, automotive thick-film sensors, chip specialty resistors, and DPC, DBC, HTCC, LTCC, AMB and thin-film ceramic boards.
Lengshuijiang Huixin Electronic Ceramics Co., Ltd. was founded in September 2008 with registered capital of RMB 20 million. It has been recognized as a Hunan entrepreneurship-plan enterprise, a National High-tech Enterprise, a Hunan "Specialized, Refined, Distinctive and Innovative" demonstration enterprise, and a Hunan "Little Giant" enterprise. The company occupies 30 mu of land with 10,000 m² of modern standard plant and a further 20,000 m² planned. It has more than 220 employees, including over 40 in R&D, process and quality. An MES system is being piloted as part of a full digital-management transition. Revenue reached RMB 58 million in 2024 and is expected to reach RMB 85 million in 2025. Phase II adds 5,000 m² of new plant, scheduled for completion in March 2026 and production in the first half of the year. More than RMB 20 million is planned for metallized ceramic products and brazing/sealing production.
Xinxiang Bashan Aviation Technology Co., Ltd. (Stock Code: 540), a subsidiary of the Aviation Industry Corporation of China (AVIC), was established in 1955. Recognized as a national-level specialized, refined, distinctive, and innovative (SRDI) "Little Giant" enterprise and a High-Tech Enterprise, the company has led or participated in the formulation of 25 national and industry standards for mesh materials and holds 81 valid patents. With over 70 years of expertise in the R&D and manufacturing of high-precision metal wire mesh, the company produces stainless steel and tungsten steel wire mesh fabrics for printing—ranging from 200 to 800 mesh—which are widely used in high-end manufacturing sectors such as MLCC ceramic capacitors, thick-film circuits, touch screens, and solar cell printing.
Jingxin Technology is a wholly-owned subsidiary of Pinsheng Electromechanical (Stock Code: 300316) and specializes in the R&D and production of advanced heat sink materials. Focusing on thermal management for wide-bandgap semiconductors, the company independently develops CVD diamond heat sinks and silicon nitride ceramic substrates, providing thermal solutions to the global power electronics, AI chip, and laser industries.
Alumina and zirconia ceramic parts
Silicon nitride ceramic balls, high-thermal-conductivity silicon nitride ceramic substrates, high-temperature wave-transparent ceramics, transparent ceramics, porous ceramics, etc.
Established in 2008, Shenzhen Xintaiming Intelligent Equipment Co., Ltd. is a provider of precision press-fitting and intelligent solutions. Recognized as a National High-Tech Enterprise, a Shenzhen "Specialized, Refined, Unique, and Innovative" (SRUI) enterprise, and an emerging enterprise for independent innovation in Shenzhen, the company is also honored as a Guangdong Province "Contract-Abiding and Trustworthy Enterprise." Several of its key technical projects have received policy support from the Shenzhen Science, Technology, and Innovation Commission. Headquartered in Longgang District, Shenzhen, the company operates a facility spanning over 10,000 square meters. In 2014, it established a production base in the Fuzhou High-tech Zone, Jiangxi Province—Jiangxi Xintaiming Intelligent Technology Co., Ltd.—featuring a self-built plant covering more than 40,000 square meters. The company possesses strong R&D capabilities, holding over 100 intellectual property rights, including utility models, invention patents, and software copyrights, and has obtained multiple certifications, such as ISO45001, ISO9001, and ISO14001.
Thermal constants, such as thermal conductivity, are fundamental physicochemical parameters for various materials. In the 1990s, Professor S. Gustafson of Chalmers University of Technology in Sweden invented the Transient Plane Source (TPS) method. By utilizing a unique double-spiral probe that functions as both a heat source and a temperature sensor, this method significantly expanded the testing range and improved the accuracy of transient measurement techniques. Thanks to advantages such as speed, accuracy, versatility, and ease of sample preparation, Hot Disk thermal constant analyzers—commercialized based on this cutting-edge technology—have gained widespread recognition and acclaim among researchers in the fields of thermophysics and materials science. As the domestic subsidiary responsible for Hot Disk products, Kagonas Instrument Trading (Shanghai) Co., Ltd. is dedicated to providing Hot Disk thermal constant analyzers tailored to diverse needs and budgets, backed by high-quality after-sales service. The company also serves as the Chinese distributor for various global suppliers of advanced instrumentation, including Advance Riko (Japan) for infrared gold-image furnaces, Ai-Phase (Japan) for thin-film thermal diffusivity testers, AGUS (Japan) for SPS (Spark Plasma Sintering) and annealing furnaces, Zuoxin (Taiwan) for MRIX micro-Raman spectrometers, and Serstech (Sweden) for handheld Raman spectrometers.
Loudi Jiarong Technology Co., Ltd. is based in Loudi, Hunan. Since its founding, the company has focused on advanced ceramics, developing and precision-machining high-performance ceramic materials to supply domestically substitutable core components for high-end equipment. Mainstream ceramic spray discs on the market are stamped from tape-cast sheets. Micro-hole ceramic discs cannot be stamped and must be laser-cut, which leaves burrs and irregular holes, raises cost, lowers efficiency and makes volume production difficult. After six months of focused work, our team used dry pressing, custom mold materials, a precision servo press and high-performance powders to break through these barriers. Our micro-hole ceramic spray discs can now reach a minimum hole diameter of 0.15 mm and a thickness of 6 mm, with smooth, burr-free inner holes. Production cost is about 50% lower than typical market products, outgoing yield exceeds 95%, and the parts can be produced in volume, earning broad customer recognition.
Suzhou Ruifei Optoelectronics is a National High-Tech Enterprise and a Jiangsu Province "Specialized, Refined, Distinctive, and Innovative" (SRDI) enterprise specializing in optical 3D inspection. It is a member of the National Technical Committee on Optics and Photonics (Microscopy Subcommittee). To date, the company has been granted 12 invention patents, 27 utility model patents, and 14 software copyrights. Ruifei Optoelectronics boasts a professional technical team with deep expertise in optical technology and extensive experience in equipment R&D, enabling the company to provide clients with professional pre-sales services, high-quality equipment manufacturing, and comprehensive after-sales support. Ruifei Optoelectronics is committed to becoming a world-class enterprise in optical metrology and inspection equipment, providing precision "optical eyes" for clients in the advanced manufacturing sector.
Foshan Foda Huakang Technology Co., Ltd. was established in 2005 and is headquartered in Foshan, Guangdong. The company was founded by a team comprising outstanding young innovators in science and technology, senior engineers, and experienced professors. It is recognized as a National High-Tech Enterprise, a "Specialized, Refined, Unique, and Innovative" (SRUI) enterprise, and a Guangdong Province enterprise integrating industry and education. The company specializes in comprehensive solutions for chip cavity packaging. Its product portfolio includes new materials for cavity packaging; B-stage and C-stage epoxy adhesives; B-stage adhesive films and rings; lidded covers (using LCP, ceramic, glass, or metal); cavity packaging housings (ACS, ACC, QFN); and precision metal parts. Additionally, the company provides equipment for isothermal cavity packaging and sealing processes, as well as comprehensive technical solutions for the entire isothermal cavity packaging workflow. Its products and solutions are widely used by R&D and manufacturing enterprises in high-end sectors such as military electronics, RF communication chips, microwave and radar systems, optical chips, AR/AI chips, optical communication chips, MEMS sensors, cavity-packaged chips, power management chips, automotive electronics, and medical devices.
The 2nd Research Institute of CETC was founded in 1962 as a national institute specializing in electronic process equipment. Over more than fifty years it has built deep experience in mechatronic, thermal and optical design. In recent years it has obtained more than fifty national patents and established particular strengths in microelectronics assembly equipment, LCD production equipment, vacuum soldering equipment, and cleaning and surface-treatment equipment. As a contractor for MOST 863 Program and NDRC industrialization projects, many of its products have been listed in the National Key New Product Program and the National Torch Program, and are exported to Japan, the United States and other markets. Guided by the goal of becoming a domestic leader in electronic process equipment, the institute is committed to serving customers and advancing China's electronic equipment industry.
Established in 2016, Jizhi Measurement Intelligent Equipment (Guangzhou) Co., Ltd. is a national high-tech enterprise holding multiple invention patents and ISO9001 quality management system certification. With over a decade of deep engagement in the fields of precision measurement and in-line inspection, the company is committed to the independent R&D of integrated hardware and software solutions. It has built a product matrix spanning six series across two major categories: "in-line inspection" and "off-line standalone systems." Its core products—including flatness measuring machines, intelligent instant measuring systems, thickness gauges, "flying-capture" intelligent measuring machines, vision measuring machines, and defect inspection systems—are widely applied in four key areas: dimensional measurement, visual defect detection, rapid automated inspection, and the R&D and enablement of intelligent equipment. Jizhi Measurement excels in the R&D of non-standard, customized solutions. Tailoring its offerings to the specific measurement needs of various industries and application scenarios, the company provides end-to-end solutions—ranging from laboratory analysis to production line deployment—thereby empowering enterprises to upgrade their measurement capabilities and build smart factories.
Green ceramic drilling machines, fired ceramic drilling machines, ceramic ultrafast laser etching machines, laser solder ball bonding (SBB) systems, automatic laser marking machines, automatic glovebox welding machines, etc.
Microwave devices, ceramic packages
Vacuum mixing degassing machine, online vacuum degassing machine, filling machine, etc.
Zhengzhou Zhongke Institute of Integrated Circuit and System Application was approved by the Zhengzhou municipal government in December 2019. Its advanced packaging (micro-assembly) production base began operation in December 2023. With 2,000 m² of Class 10,000 cleanroom and a solid team, it offers chip designers, research institutes and system makers one-stop services for ceramic-metal packaged microwave modules and sensors—from design support and prototyping to volume foundry and test/validation. The base has more than 70 pieces of process equipment covering electrical assembly, integrated assembly and welding, cleaning, eutectic attach, epoxy attach, bonding, sealing, test and screening. Capacity, measured on 8-channel Ku-band T/R modules, is 100,000 channels/year and can expand to 150,000. First-pass assembly yield is ≥92% and full-flow manufacturing yield is ≥98%. Flexible multi-chip stacked SiP packaging capacity is 20,000 sets/year.
Yixing Shenxing Technology Co., Ltd. was founded on 12 May 2010 in Yixing, Wuxi—China's "pottery capital." It is a specialized ceramics company integrating R&D, production and sales. Its high-precision advanced ceramics, alumina ceramics, zirconia ceramics and EV pump/valve ceramics offer high wear and corrosion resistance, high-temperature and oxidation resistance, good insulation and stable performance. They are widely used in communications, electronics, electrical, automotive, chemical, machinery, oilfield equipment and new energy. The company obtained IATF 16949 certification in 2022. Guided by "quality first, customers first," it aims to be a modern, environmentally responsible supplier and to create greater value for customers through competitive products and after-sales service.
