Deeply committed to the R&D and manufacturing of ceramic powders and components, Nanjing Yitai provides one-stop ceramic solutions for communications, packaging, and new energy applications.
Nanjing Yitai New Materials Co., Ltd. will participate in Aibang’s 8th Precision Ceramics Industry Chain Exhibition from August 26 to 28, 2026 (Booth No. B16). We warmly invite industry colleagues to visit us and exchange ideas!
Company Profile
Nanjing Yitai New Materials Co., Ltd. is a high-tech enterprise integrating R&D, production, and sales. The company is located in Jiangning, Nanjing—a key national hub for scientific and technological innovation and a base for advanced manufacturing in Eastern China.
With over a decade of development and accumulated expertise, the company has assembled a top-tier domestic R&D team. It is dedicated to the design, development, and production of ceramic powders, high-temperature pastes, electroplating solutions, communication components, and various structural ceramic parts.
Key products include: ceramic sensor substrates, ceramic packages (housings), structural ceramics, ceramics for communication applications, and ceramic components for new energy sectors.
Product Introduction
Chip Packaging Housings
Housings for wireless power devices feature characteristics such as impedance matching and low signal loss; they provide physical support, electrical and thermal pathways, and hermetic environmental protection for power devices.
These modules are designed for applications such as digital mobile communications, point-to-point and multipoint communications, and wireless networks. They incorporate advanced metal heat-dissipation materials—such as CPC and CMC—in mass production. Operating frequencies span the P, L, and S bands, and custom specifications are available.
Product Features and Advantages
High-strength ceramic with excellent hermeticity ensures the long-term, reliable operation of packaged chips in harsh outdoor environments;
High heat resistance, excellent thermal conductivity, and superior insulation properties (high dielectric strength);
Excellent ceramic-to-metal matching and strong bonding enhance solder joint integrity and overall reliability;
Fine circuitry can be designed directly onto the ceramic, enabling high-density packaging, circuit integration, and miniaturization;
Internal input matching achieves high gain and high efficiency.
Ceramic Sensor Series
Converts the deformation caused by pressure applied to the ceramic membrane surface into electrical signals.
Pressure Sensor
Ceramic critical dimension tolerance: ±0.005 mm
Surface roughness: Ra 0.1–0.3
Ceramic density: ≥3.7 g/cm³
Structural ceramic components
Firing and sintering supports for MLCC electronic components
Features:
▪️ Open-structure design reduces the load on the kiln and extends the service life of the furnace body.
▪️ Top and bottom nickel mesh coatings minimize contamination of electronic component surfaces caused by traditional refractory materials.
▪️ Improves the pass rate during the binder burnout stage, thereby increasing the overall product yield.
Applications:
▪️ Firing of MLCC components (temperature resistance up to 1600°C).
▪️ Firing of multilayer LTCC inductors and filters.
▪️ Electronic components with stringent requirements for the binder burnout process.
Ceramics for Telecommunications
Dielectric Filters
Designed and manufactured using dielectric ceramic materials characterized by low loss, high dielectric constant, low frequency-temperature coefficients, low thermal expansion, and high power-handling capabilities. These filters are used in 5G mobile communication base stations, where they improve waveform quality to ensure faster and more stable signal transmission.
Dielectric Resonator
Primarily used in microwave components such as resonators, filters, dielectric antennas, and dielectric waveguide circuits.
Features: ▪️ Low temperature coefficient ▪️ High Q-factor ▪️ Advanced powder material system
Applications: ▪️ 200–9000 MHz frequency combiners and filters ▪️ Duplexers
Ceramic Dielectric Antennas
High mechanical strength, high operational reliability, compact size, and light weight.
Product Features: ▪️High gain ▪️Low profile ▪️Ultra-lightweight ▪️Low in-band axial ratio
Microwave dielectric ceramic material
Ceramic materials used as dielectric components in microwave-frequency circuits—serving one or more functions—act as the raw materials for dielectric ceramic filters.
Based on the dielectric constant (K), the following microwave dielectric ceramic materials are developed and produced:
Ceramics for structural components
Electroplating Series
Recommended Event 1: Aibang’s 8th Precision Ceramics Industry Chain Exhibition [August 26–28, 2026 | Hall 7, Shenzhen World Exhibition & Convention Center (Bao'an New Venue)]
Booth Booking
Ms. Li: 18823755657 (WeChat ID)
Email: lirongrong@aibang.com
Scan the QR code to add on WeChat and inquire about exhibition details.
Recommended Event 2: 9 Concurrent Forums
Concurrent Forums at the 8th Precision Ceramics Industry Chain Exhibition | |
6th LTCC/HTCC Industry Forum | 6th MLCC Industry Forum |
Semiconductor Thermal Management Materials Industry Forum | SOFC/SOEC Ceramics Industry Forum |
Ceramic Substrate and Power Semiconductor Industry Forum | Advanced Ceramics Industry Forum |
Piezoelectric Ceramics Industry Forum | Semiconductor Ceramics Industry Forum |
Microwave Dielectric Ceramics Industry Forum | |
How to register as an attendee:
Scan the QR code or copy the link to register.